Influence of polishing systems on roughness and color change of two dental ceramics

Abstract

PURPOSE. To evaluate the polishing effect on roughness and color change of pressed and layering ceramics after immersion in coffee solution. MATERIALS AND METHODS. 88 ceramic discs (1.0 mm x 10.0 mm) were manufactured - 44 nano-fluorapatite layering ceramics (IPS e.max Ceram. Group C) and 44 pressed lithium disilicate ceramic discs (IPS e. max Press - Group P). Each group was divided into 4 subgroups according to surface treatments: (G) Glaze, (S) Shofu polishing system (Shofu Inc.), (E) Edenta AG polishing System, (KG) 30-pm diamond granulation tip. Surface roughness (Ra) and color change (Delta E) measurings after the surface treatments were performed, before and 12 days after the immersion in coffee solution. A sample's qualitative analysis was conducted with a scanning electron microscopy (SEM). Data were statistically-treated with oneway-ANOVA and Duncan's tests, apart from paired t-test and Pearson's correlation test (alpha=5%). RESULTS. The decrescent order, both for surface roughness (Ra) and Delta E for both ceramics were: KG > E > S > G (P<.05). With exception for PG and CG subgroups, which did not present statistical difference between them, all other pressed ceramics subgroups presented smaller Ra values and greater Delta E values than the layering ceramics subgroups (P<.05). CONCLUSION. Although mechanical polishing systems presented intermediate Ra values, their colors were considered clinically acceptable. There is a strong correlation between the surface roughness and the color change of tested ceramics.